Back to Wood Stoves / Back to Hearthstone Wood Stoves
Mansfield Wood Stove
Mansfield Woodstove Heats large home with ease
Model #8011
The Mansfield is a workhorse of a stove. HearthStone's largest model,
it can provide up to 14 hours of sustained heat on a single load of wood. Producing up to 80,000 BTUs, it can tackle the coldest of climates and
keep your entire home warm and comfortable, even when you're out enjoying the snow all day long, or are too pooped to get out of bed and
put a fresh log on the fire in the middle of the night.

Heats up to: 2,500 sq. ft.
Burn Time: Up to 10 hours
Heat Life: Up to 14 hours
Size: 80,000 BTUs
EPA Rating: 2.8 grams per hour
Maximum Log Length: 21"

Features
3.2 cubic foot firebox; extra wide door
Holds up to 64 lbs. of wood. The Mansfield's deep firebox allows logs
up to 21" in length to be accommodated straight in or side-to-side for
easy loading.

Single air-intake lever/stove control
Stove operation is easy; performance more consistent.
Open and close ash grate and removable ash drawer
Easy, clean ash removal; pan can be removed while fire is still burning.

Unmatched fire viewing
Air entering the firebox through the stove's secondary air tubes ignites
the gases rising off the burning wood. The resulting light and flames
provide dazzling fire viewing, even when the fire is burning at a low rate.

Non-catalytic combustion system
Clean burning, more complete combustion provides more heat from less wood, greater efficiency; reduced smoke and creosote build-up.

Outside air adapter (optional)
Improved efficiency in today's newer "airtight" homes; reduces cold
air drafts along the floor.

Rear heat shield (optional)
Allows more placement options; stove can be installed closer to a wall because clearance requirements are reduced; creates a convection passageway between shield and back of stove to allow fan to circulate
air through house.

Fan with built-in thermostat and rheostat (optional)
Helps spread heat evenly throughout home; fan operates only when
stove is at significant heat level. The rheostat controls fan speed. Use
of rear heat shield is required.